mount.ceph -- mount a Ceph file system
mount.ceph is a helper for mounting the Ceph file system on a Linux host. It serves to resolve monitor hostname(s) into IP addresses and read authentication keys from disk; the Linux kernel client component does most of the real work. To mount a Ceph file system use:
mount.ceph firstname.lastname@example.org_name=/ /mnt/mycephfs -o mon_addr=22.214.171.124
Mount helper can fill in the cluster FSID by reading the ceph configuration file. Its recommended to call the mount helper via mount(8) as per:
mount -t ceph name@.fs_name=/ /mnt/mycephfs -o mon_addr=126.96.36.199
Note that the dot
. still needs to be a part of the device string in this case.
The first argument is the device part of the mount command. It includes the RADOS user for authentication, the file system name and a path within CephFS that will be mounted at the mount point.
Monitor addresses can be passed using
mon_addr mount option. Multiple monitor
addresses can be passed by separating addresses with a slash (/). Only one
monitor is needed to mount successfully; the client will learn about all monitors
from any responsive monitor. However, it is a good idea to specify more than one
in case the one happens to be down at the time of mount. Monitor addresses takes
the form ip_address[:port]. If the port is not specified, the Ceph default of 6789
If monitor addresses are not specified, then mount.ceph will attempt to determine
monitor addresses using local configuration files and/or DNS SRV records. In similar
way, if authentication is enabled on Ceph cluster (which is done using CephX) and
secretfile are not specified in the command, the mount
helper will spawn a child process that will use the standard Ceph library routines
to find a keyring and fetch the secret from it (including the monitor address and
FSID if those not specified).
A sub-directory of the file system can be mounted by specifying the (absolute) path to the sub-directory right after "=" in the device part of the mount command.
Mount helper application conventions dictate that the first two options are device to be mounted and the mountpoint for that device. Options must be passed only after these fixed arguments.
Path to a ceph.conf file. This is used to initialize the Ceph context for autodiscovery of monitor addresses and auth secrets. The default is to use the standard search path for ceph.conf files.
int (seconds), Default: 60
Set the connection mode that the client uses for transport. The available modes are:
legacy: use messenger v1 protocol to talk to the cluster
crc: use messenger v2, without on-the-wire encryption
secure: use messenger v2, with on-the-wire encryption
prefer-crc: crc mode, if denied agree to secure mode
prefer-secure: secure mode, if denied agree to crc mode
Monitor address of the cluster in the form of ip_address[:port]
Cluster FSID. This can be found using ceph fsid command.
secret key for use with CephX. This option is insecure because it exposes the secret on the command line. To avoid this, use the secretfile option.
path to file containing the secret key to use with CephX
Set auto reconnect mode in the case where the client is blocklisted. The available modes are
clean. The default is
no: never attempt to reconnect when client detects that it has been blocklisted. Blocklisted clients will not attempt to reconnect and their operations will fail too.
clean: client reconnects to the Ceph cluster automatically when it detects that it has been blocklisted. During reconnect, client drops dirty data/metadata, invalidates page caches and writable file handles. After reconnect, file locks become stale because the MDS loses track of them. If an inode contains any stale file locks, read/write on the inode is not allowed until applications release all stale file locks.
int, Default: calculated
int, cap release delay, Default: 60
int, cap release delay, Default: 5
funky cat dirname for stats, Default: off
no funky cat dirname for stats
no dcache readdir
no data crc on writes
create a new client instance, instead of sharing an existing instance of a client mounting the same cluster
int, Default: 5
int (seconds), Default: 60
int (bytes), max readahead. Default: 8388608 (8192*1024)
Report the recursive size of the directory contents for st_size on directories. Default: off
Do not report the recursive size of the directory contents for st_size on directories.
int, Default: 524288 (512*1024)
int, Default: 1024
int (bytes), max read size. Default: 16777216 (16*1024*1024)
string, set the name of the hidden snapdir. Default: .snap
int (kb), max writeback in flight. scale with available memory. Default: calculated from available memory
int (bytes), max write size. Default: 16777216 (16*1024*1024) (writeback uses smaller of wsize and stripe unit)
Execute all namespace operations synchronously. This ensures that the namespace operation will only complete after receiving a reply from the MDS. This is the default.
Allow the client to do namespace operations asynchronously. When this option is enabled, a namespace operation may complete before the MDS replies, if it has sufficient capabilities to do so.
Mount the full file system:
mount -t ceph fs_user@.mycephfs2=/ /mnt/mycephfs
Mount only part of the namespace/file system:
mount.ceph fs_user@.mycephfs2=/some/directory/in/cephfs /mnt/mycephfs
Pass the monitor host's IP address, optionally:
mount.ceph fs_user@.mycephfs2=/ /mnt/mycephfs -o mon_addr=192.168.0.1
Pass the port along with IP address if it's running on a non-standard port:
mount.ceph fs_user@.mycephfs2=/ /mnt/mycephfs -o mon_addr=192.168.0.1:7000
If there are multiple monitors, pass each address separated by a /:
mount.ceph fs_user@.mycephfs2=/ /mnt/mycephfs -o mon_addr=192.168.0.1/192.168.0.2/192.168.0.3
Pass secret key for CephX user optionally:
mount.ceph fs_user@.mycephfs2=/ /mnt/mycephfs -o secret=AQATSKdNGBnwLhAAnNDKnH65FmVKpXZJVasUeQ==
Pass file containing secret key to avoid leaving secret key in shell's command history:
mount.ceph fs_user@.mycephfs2=/ /mnt/mycephfs -o secretfile=/etc/ceph/fs_username.secret
If authentication is disabled on Ceph cluster, omit the credential related option:
mount.ceph fs_user@.mycephfs2=/ /mnt/mycephfs
mount.ceph is part of Ceph, a massively scalable, open-source, distributed storage system. Please refer to the Ceph documentation at https://docs.ceph.com for more information.
recover_session= option was added to mainline Linux kernels in v5.4.
nowsync were added in v5.7.